#!/bin/sh 
#
# BOINC - start and stop the BOINC client daemon on Unix
#
#  Unix start/stop script to run the BOINC client as a daemon at
#  system startup, as the 'boinc' user (not root!).
#
#  This version should work on unixes that have bash, zsh, or ksh.  If 
#  started with another Bourne compatible shell, it will attempt to restart 
#  in bash, zsh, or ksh.
#
#  Metadata for chkconfig and the SUSE equivalent INIT info are included below.
#
#  Usage:  boinc { start | stop | status | reload | restart }
#  
###
# chkconfig: 345 98 02
# description: This script starts the local BOINC client as a daemon
#         For more information about BOINC (the Berkeley Open Infrastructure
#         for Network Computing) see http://boinc.berkeley.edu
# processname: boinc
# config: /etc/sysconfig/boinc
#
### BEGIN INIT INFO
# Provides: boinc
# Required-Start: $network
# Required-Stop:  $network
# Default-Start: 3 4 5 
# Default-Stop: 0 1 2 6
# Short-Description: This script monitors the BOINC client.
# Description: This script starts the local BOINC client as a daemon
#         For more information about BOINC (the Berkeley Open Infrastructure
#         for Network Computing) see http://boinc.berkeley.edu
### END INIT INFO
#
# Eric Myers <myers@vassar.edu>  - 27 July 2004
# Department of Physics and Astronomy, Vassar College, Poughkeepsie NY
# Eric Myers <myers@spy-hill.net> 
# Spy Hill Research, Poughkeepsie, New York
# @(#) $Id: boinc,v 1.10 2007/12/27 20:09:09 myers Exp $
#
# Modified by Eric Korpela <korpela@ssl.berkeley.edu> - 11 Apr 2008
########################################################################

# Defaults, which can be overridden by putting new NAME=value lines 
#  in /etc/sysconfig/boinc-client, /etc/default/boinc-client, 
#  /etc/boinc-client.conf, or the same files under ${sysconfdir}

## These 4 installation dirs set by autoconf. ##########################
prefix=`dirname @prefix@/.`
exec_prefix=`dirname @exec_prefix@/.`
bindir=`dirname @bindir@/.`
sysconfdir=`dirname @sysconfdir@/.`
########################################################################

# set the basic PATH
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/ucb/bin
export PATH

# Find the correct ps to use.  On solaris /usr/ucb/ps is the one to use
# on everything else, we hope the first one in the path is the right one.
if [ -x /usr/ucb/ps ] ; then
  PS=/usr/ucb/ps
else
  PS=ps
fi

########################################################################
#
# Figure out if we are running under an acceptable shell 
# (bash, ksh, zsh) which supports functions.
#
########################################################################
SHELLS="bash ksh zsh"
# count how many times we've tried to restart
TRIES=$2
if [ -z "$TRIES" ] ; then
  TRIES=0
fi
# bash and zsh are easy to test.
if [ -z "$BASH_VERSION" -a -z "$ZSH_VERSION" ] ; then
  # we aren't running under bash or zsh, check for ksh
  if [ -z "`echo ${ENV} | grep ksh`" ] ; then
    # still might be ksh.  One last shot.
    if [ -z "`${PS} $$ | tail -1 | grep ksh`" ] ; then
      # as far as I can tell we aren't in an approved shell
      TRIES=`expr $TRIES + 1`
      # have we tried too many times?
      if [ $TRIES -gt 4 ] ; then 
        echo "ERROR: endless loop discovered in $0 [ERROR]"
        exit 1
      fi
      for try in $SHELLS ; do
        ex=`which $try`
        if [ ! -z "${ex}" -a -x "${ex}" ] ; then
          if ${ex} $0 $1 $TRIES ; then
            # it worked, we can exit
            exit 0
          else
            # it failed for some reason that should have been printed
            # by the script
            exit 1
          fi
        fi
      done
      # if we got here, we tried everything.
      echo "ERROR: $0 requires bash, zsh, or ksh to run.	[FALIED]"
      exit 1
    fi
    #if we got here or below, were in an approved shell.
  fi
fi
########################################################################


# Name of user to run as:
#
BOINCUSER=boinc

# Working directory.  Could be /home/boinc, /var/lib/boinc, etc..
# The reason I prefer /var/lib/boinc is that this works best for a 
# cluster of computers where /home/anything might be shared between machines
#
BOINCDIR=/var/lib/boinc

# Name of the client executable.  This is the file "boinc" if you 
# unpacked the download file  boinc_M.mm.rr_i686-pc-linux-gnu.sh,
# but I like to rename it and put it in a public place.
# (Hint: move boincmgr to /usr/local/bin too so anyone can easily use it).
#
BOINCEXE_NAME=boinc_client
BOINCEXE=${bindir}/${BOINCEXE_NAME}
BOINCCMD_NAME=boinccmd
BOINCCMD=${bindir}/${BOINCCMD_NAME}

# Log files (you should rotate these occasionally)
#
LOGFILE=/var/log/${BOINCEXE_NAME}.log
ERRORLOG=/var/log/${BOINCEXE_NAME}_err.log

# PID file
PIDFILE=/var/run/${BOINCEXE_NAME}.pid

# BOINC options: for the command line when running the client.  
# Be aware that --allow_remote_gui_rpc opens up your machine to the world!
#
# Add this option if you want to allow boinc manager connections from remote
# machines
#BOINCOPTS="--allow_remote_gui_rpc"   
# Add this option if you want to turn off all logging
#BOINCOPTS="--daemon"
# Add this option if you want to redirect logging to the files stderrdae.txt
# and stdoutdae.txt in BOINCDIR rather than LOGFILE and ERRORLOG
#BOINCOPTS="--redirectio"
# Add this option if you want to run only when no logins from anywhere are 
# active
#BOINCOPTS="--check_all_logins"
# The default is no options.
BOINCOPTS=

# Subsys lock file ...

# If there is the subsys directory, then use it ...
if [ -d /var/lock/subsys/ ]; then
        LOCKFILE=/var/lock/subsys/${BOINCEXE_NAME}
elif [ -d /var/lock ]; then
        LOCKFILE=/var/lock/${BOINCEXE_NAME}
elif [ -d /var/run ]; then
        LOCKFILE=/var/run/${BOINCEXE_NAME}.lock
fi

# su on Linux seems to need this to be set to work properly in a script
export TERM=dumb


##
# Init script function library.   This stuff is Red Hat specific,
# but if the functions are not found we create our own simple replacements.
# (The idea for replacing the functions comes from OpenAFS.  Thanks guys!)

if [ -f /etc/rc.d/init.d/functions ] ; then
      . /etc/rc.d/init.d/functions
else
      if printf "Hello" >/dev/null 2>/dev/null ; then
           # printf works
           printcol='printf \033[60G%s'
      elif echo -en "Hello" >/dev/null 2>/dev/null ; then
           # echo -en works
           printcol='echo -en \033[60G'
      else
           # no printf make do with echo -n
           printcol="echo -n .........."
      fi
      function echo_success () { $printcol "[OK]" ; }
      function echo_failure () { $printcol "[FAILED]" ; }
      function echo_warning () { $printcol "[WARNING]" ; }
      function killproc() {
             PID=`local_pidof $1`
             [ $PID ] && kill $PID 
      }
fi

# check if we have pidof.  If not use ps and grep for the same job.
if [ -x /sbin/pidof ] ; then 
  function local_pidof() { 
    pidof -s -x -o $$ -o $PPID -o %PPID $1 
  } 
else
  function local_pidof() {
    ${PS} xaugww | sed 's/$/ /' | grep "[ /]$1 " | grep -v $$ | grep -v $PPID | grep -v %PPID | grep -v grep | awk '{print $2}' | head -1
  }
fi

#
# Check if we have runuser, since it will never hang waiting for a password.  
# If we don't have it, use su for the same job.
# 
if [ ! -x /sbin/runuser ] ; then
  RUNUSER="su -s /bin/sh"
else 
  RUNUSER=runuser
fi

# Some additional places to look for executables
# (Should do this after init.d/functions and sysconfig/boinc, which sets PATH)
export PATH=${PATH}:${exec_prefix}/sbin:${bindir}


## Look for any local configuration settings which override all above
## Note: ./boinc-client.conf and ./boinc.conf are for testing purposes
config_files="
./boinc-client.conf
./boinc.conf
/etc/sysconfig/boinc-client
/etc/default/boinc-client
/etc/boinc-client.conf
${sysconfdir}/sysconfig/boinc-client
${sysconfdir}/default/boinc-client
${sysconfdir}/boinc-client.conf
/etc/sysconfig/boinc
/etc/default/boinc
/etc/boinc.conf
${sysconfdir}/sysconfig/boinc
${sysconfdir}/default/boinc
${sysconfdir}/boinc.conf
none
"

## find the correct config file
for config_file in $config_files ; do
  if [ -f ${config_file} ] ; then 
    break; 
  fi
done

if [ "${config_file}" != "none" ]; then
  # check whether we are using a deprecated name
  if [ "x$NOWARNING" != "xyes" -a -z "`echo ${config_file} | grep boinc-client`" ]; then
    fn=`basename $config_file`
    dn=`dirname $config_file`
    newname=`echo $fn | sed 's/boinc/boinc-client/'`
    echo -n "The filename '${config_file}' is deprecated..."
    echo_warning
    echo
    echo -n "Please rename your config file to '${dn}/${newname}'"
    echo_warning
    echo
  fi
  # execute the config file.
  . ${config_file}
fi


## Add ${BOINCDIR} to the path, just in case the executables are stored there.
export PATH=${PATH}:${BOINCDIR}

## Create the working directory if it doesn't exist:
if [ ! -d $BOINCDIR ]; then
  echo -n "Creating $BOINCDIR "
  if mkdir -p $BOINCDIR 2>/dev/null ; then
    if [ -n "$BOINCUSER" ] ; then
      if chown $BOINCUSER $BOINCDIR ; then
        echo_success
      else
        echo_failure
        echo
        exit 7
      fi
    fi
  else
    echo_failure
    echo
    exit 7
  fi
fi

## Check what user we are running as:
# we can't rely on the existence of "whoami" or "logname", so we'll use ps.
USERNOW=`${PS} u $$ | tail -1 | awk '{print $1}'`
if [ -z "$BOINCUSER" ] ; then
  BOINCUSER="${USERNOW}"
fi

## Check that BOINCUSER actually exists
if [ -z "`grep ^${BOINCUSER}: /etc/passwd`" ] ; then
  if [ -z "`ypcat passwd 2>/dev/null | grep ^${BOINCUSER}:`" ] ; then 
    if [ -z "`nidump passwd / 2>/dev/null | grep ^${BOINCUSER}:`" ] ; then 
       echo -n ERROR: user ${BOINCUSER} does not exist.
       echo_failure
       echo
       exit 9
    fi
  fi
fi

# if we are running as root, print a warning.
if [ "x$NOWARNING" != "xyes" -a  "$BOINCUSER" = "root" ] ; then
  echo -n WARNING: boinc-client will be running as root
  echo_warning
  echo
fi

# check whether we will be able to write to the BOINC directory
if [ "${USERNOW}" = "${BOINCUSER}" ] ; then
  if [ ! -O ${BOINCDIR} ] ; then
    echo -n ERROR: $BOINCDIR is not owned by $BOINCUSER.
    echo_failure
    echo
    exit 8
  fi
elif [ "${USERNOW}" = "root" ] ; then
  cmd="if test -O ${BOINCDIR} ; then echo success ; fi"
  if [ -z `$RUNUSER $BOINCUSER -c "$cmd"` ]; then
    echo -n ERROR: $BOINCDIR is not owned by $BOINCUSER.
    echo_failure
    echo
    exit 8
  fi
fi


## Locate the executable, either boinc_client, boinc, 
## or boinc_M.mm_.... with highest version number
## We only do this if BOINCEXE set above isn't found or is not executable.
if [ ! -x $BOINCEXE ]; then
  BOINCEXE=`$WHICH $BOINCEXE_NAME 2>/dev/null`
  if [ ! -x "$BOINCEXE" ]; then
    BOINCEXE=`$WHICH boinc 2>/dev/null`
  fi
fi

if [ ! -x "$BOINCEXE" ]; then
  echo -n "Cannot find an executable for the BOINC client."
  echo_failure
  echo 
  exit 2
fi

## boinccmd will probably be in the same place as the boinc_client
if [ ! -x $BOINCCMD ]; then
  BOINCCMD=`$WHICH $BOINCCMD_NAME 2>/dev/null`
  if [ ! -x "$BOINCCMD" ]; then
    BOINCCMD=`dirname $BOINCEXE 2>/dev/null`/${BOINCCMD_NAME}
  fi
fi


if [ "x$NOWARNING" != "xyes" -a ! -x $BOINCCMD ]; then
  echo -n "Cannot find the boinccmd executable.  Reload will fail."
  echo_warning
  echo
fi

## Functions: $1 is one of  start|stop|status|reload|restart

export NOWARNING=yes

case "$1" in
  start)
        cd $BOINCDIR
        PID=`local_pidof $BOINCEXE_NAME`

        if [ -f lockfile -o -f $LOCKFILE ] ; then
          if [ -z "$PID" ] ; then
            # a lockfile exists, but boinc_client isn't running
            /bin/rm -f lockfile $LOCKFILE $PIDFILE 2>&1 > /dev/null
          else 
            echo -n "Another instance of BOINC is running (PID=${PID})."
            echo_failure
            echo 
            exit 1
          fi
        fi

        if [ ! -d projects ] ; then
          echo -n "The BOINC client requires initialization."
          echo_warning
          echo 
        fi

        touch ${LOGFILE} ${ERRORLOG}
        NOCORE="ulimit -c 0 2>&1 >/dev/null"
        echo -n "Starting BOINC client as a daemon:  "
        if [ "${BOINCUSER}" = "${USERNOW}" ] ; then 
           # I am BOINCUSER.  Just start client as me.
           $NOCORE
           $BOINCEXE $BOINCOPTS >>$LOGFILE 2>>$ERRORLOG &
        else
           chown ${BOINCUSER} ${LOGFILE} ${ERRORLOG}
           if [ -f gui_rpc_auth.cfg ] ; then
              chmod g+r gui_rpc_auth.cfg 
           fi
           ${RUNUSER} - $BOINCUSER -c "$NOCORE ; $BOINCEXE $BOINCOPTS >>$LOGFILE 2>>$ERRORLOG" 2>/dev/null > /dev/null &
        fi
        sleep 3  
        PID=`local_pidof $BOINCEXE_NAME`
        if [ $PID ]; then
          echo $PID > $PIDFILE
          touch $LOCKFILE && echo_success || ( echo_failure ; echo )
        fi
        echo
        ;;
  stop)
        cd $BOINCDIR
        if [ ! -f $PIDFILE -a ! -f lockfile -a ! -f $LOCKFILE ] ; then
          echo -n "BOINC is not running (no lockfiles found)."
          echo_success
        else
          echo -n "Stopping BOINC client daemon:  "    
          if [ -f $PIDFILE ] ; then
            PID=`cat $PIDFILE`
            if [ -n "`${PS} $PID | grep $PID`" ] ; then
              kill `cat $PIDFILE`
              sleep 5
            fi
            if [ -z "`${PS} $PID | grep $PID`" ] ; then
              echo_success
            else
              echo_failure
              echo
            fi
          else
            killproc $BOINCEXE_NAME  && echo_success  || echo_failure 
          fi
          # clean up in any case
          rm -f lockfile 2>/dev/null >/dev/null
          rm -f $LOCKFILE 2>/dev/null
          rm -f $PIDFILE 2>/dev/null
        fi
        echo
        ;;
  reload)
        if [ ! -f lockfile -a ! -f $LOCKFILE ] ; then
          echo  "BOINC is not running (no lockfiles found) -- starting service."
          $0 start
        else
          $BOINCCMD --read_cc_config >>$LOGFILE 2>>$ERRORLOG && echo_success || $0 restart
        fi
        ;;
  restart)
        $0 stop
        $0 start
        ;;

  status)
        PID=`cat $PIDFILE 2>/dev/null`
        if [ "$PID" != "" ]; then
          # is it still running?
          if [ -z "`${PS} $PID | grep $PID`" ]; then
            # not running.  Try the other tests.
            PID=""
          fi
        fi
        if [ "$PID" == "" ]; then
          PID=`local_pidof $BOINCEXE_NAME`
        fi
        if [ "$PID" == "" ]; then
          PID=`local_pidof $BOINCEXE`
        fi
        if [ "$PID" != "" ]; then
          echo "BOINC client is running (pid $PID)."
        else
          if [ -f $BOINCDIR/lockfile -o -f $LOCKFILE ]; then 
             echo "BOINC is stopped but lockfile(s) exist."
             exit 2
          else 
             echo "BOINC client is stopped."
             exit 3
          fi
        fi
        ;;

  *)
        echo "Usage: boinc {start|stop|restart|reload|status}"
        exit 1
esac

exit

#EOF#