/*
 * This file is part of the flashrom project.
 *
 * SPDX-License-Identifier: GPL-2.0-or-later
 * SPDX-FileCopyrightText: 2000 Silicon Integrated System Corporation
 * SPDX-FileCopyrightText: 2004 Tyan Corp
 * SPDX-FileCopyrightText: 2005-2008 coresystems GmbH <stepan@openbios.org>
 * SPDX-FileCopyrightText: 2006-2009 Carl-Daniel Hailfinger
 * SPDX-FileCopyrightText: 2009 Sean Nelson <audiohacked@gmail.com>
 * SPDX-FileCopyrightText: 2025 Antonio Vázquez Blanco <antoniovazquezblanco@gmail.com>
 */

	{
		.vendor		= "ESMT",
		.name		= "F25L008A",
		.bustype	= BUS_SPI,
		.manufacture_id	= ESMT_ID,
		.model_id	= ESMT_F25L008A,
		.total_size	= 1024,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_EITHER,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 256} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 16} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_60,
			}, {
				.eraseblocks = { {1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE1,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "ESMT",
		.name		= "F25L32PA",
		.bustype	= BUS_SPI,
		.manufacture_id	= ESMT_ID,
		.model_id	= ESMT_F25L32PA,
		.total_size	= 4096,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_EITHER | FEATURE_OTP,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 1024} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {4 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_60,
			}, {
				.eraseblocks = { {4 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP2_BPL,
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "ESMT",
		.name		= "F49B002UA",
		.bustype	= BUS_PARALLEL,
		.manufacture_id	= ESMT_ID,
		.model_id	= ESMT_F49B002UA,
		.total_size	= 256,
		.page_size	= 4096,
		.feature_bits	= FEATURE_EITHER_RESET,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_JEDEC,
		.probe_timing	= TIMING_ZERO,	/* Datasheet has no timing info specified */
		.block_erasers	=
		{
			{
				.eraseblocks = {
					{128 * 1024, 1},
					{96 * 1024, 1},
					{8 * 1024, 2},
					{16 * 1024, 1},
				},
				.block_erase = JEDEC_SECTOR_ERASE,
			}, {
				.eraseblocks = { {256 * 1024, 1} },
				.block_erase = JEDEC_CHIP_BLOCK_ERASE,
			}
		},
		.write		= WRITE_JEDEC1,
		.read		= READ_MEMMAPPED,
		.voltage	= {4500, 5500},
	},