/*
 * This file is part of the flashrom project.
 *
 * SPDX-License-Identifier: GPL-2.0-or-later
 * SPDX-FileCopyrightText: 2000 Silicon Integrated System Corporation
 * SPDX-FileCopyrightText: 2004 Tyan Corp
 * SPDX-FileCopyrightText: 2005-2008 coresystems GmbH <stepan@openbios.org>
 * SPDX-FileCopyrightText: 2006-2009 Carl-Daniel Hailfinger
 * SPDX-FileCopyrightText: 2009 Sean Nelson <audiohacked@gmail.com>
 * SPDX-FileCopyrightText: 2025 Antonio Vázquez Blanco <antoniovazquezblanco@gmail.com>
 */

	/* The ST M25P05 is a bit of a problem. It has the same ID as the
	 * ST M25P05-A in RES mode, but supports only 128 byte writes instead
	 * of 256 byte writes. We rely heavily on the fact that PROBE_SPI_RES1
	 * only is successful if RDID does not work.
	 */
	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P05",
		.bustype	= BUS_SPI,
		.manufacture_id	= 0, /* Not used. */
		.model_id	= ST_M25P05_RES,
		.total_size	= 64,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RES1,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {32 * 1024, 2} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {64 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE1, /* 128 */
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P05-A",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P05A,
		.total_size	= 64,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {32 * 1024, 2} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {64 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	/* The ST M25P10 has the same problem as the M25P05. */
	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P10",
		.bustype	= BUS_SPI,
		.manufacture_id	= 0, /* Not used. */
		.model_id	= ST_M25P10_RES,
		.total_size	= 128,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RES1,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {32 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {128 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE1, /* 128 */
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P10-A",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P10A,
		.total_size	= 128,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {32 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {128 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P128",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P128,
		.total_size	= 16384,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {256 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {16 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P16",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P16,
		.total_size	= 2048,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 32} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {2 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST", /* Numonyx */
		.name		= "M25P20",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P20,
		.total_size	= 256,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {256 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP1_SRWD,
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P20-old",
		.bustype	= BUS_SPI,
		.manufacture_id	= 0, /* Not used. */
		.model_id	= ST_M25P20_RES,
		.total_size	= 256,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RES1,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {256 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP1_SRWD,
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P32",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P32,
		.total_size	= 4096,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {4 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST", /* Numonyx */
		.name		= "M25P40",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P40,
		.total_size	= 512,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 8} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {512 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P40-old",
		.bustype	= BUS_SPI,
		.manufacture_id	= 0, /* Not used. */
		.model_id	= ST_M25P40_RES,
		.total_size	= 512,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RES1,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 8} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {512 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P64",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P64,
		.total_size	= 8192,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 128} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {8 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25P80",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25P80,
		.total_size	= 1024,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {64 * 1024, 16} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PE10",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PE10,
		.total_size	= 128,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 32} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 2} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {128 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PE16",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PE16,
		.total_size	= 2048,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 512} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 32} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {2 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PE20",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PE20,
		.total_size	= 256,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {256 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PE40",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PE40,
		.total_size	= 512,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 128} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 8} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {512 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PE80",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PE80,
		.total_size	= 1024,
		.page_size	= 256,
		.feature_bits	= FEATURE_WRSR_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 256} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 16} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
		.unlock		= SPI_DISABLE_BLOCKPROTECT,
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PX16",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PX16,
		.total_size	= 2048,
		.page_size	= 256,
		/* OTP: 64B total; read 0x4B; write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { { 4 * 1024, 512 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 32} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {2 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2300, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PX32",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PX32,
		.total_size	= 4096,
		.page_size	= 256,
		/* OTP: 64B total; read 0x4B; write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PRE,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { { 4 * 1024, 1024 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {4 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PX64",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PX64,
		.total_size	= 8192,
		.page_size	= 256,
		/* OTP: 64B total; read 0x4B; write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { { 4 * 1024, 2048 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 128} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {8 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M25PX80",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M25PX80,
		.total_size	= 1024,
		.page_size	= 256,
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { { 4 * 1024, 256 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 16} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256,
		.read		= SPI_CHIP_READ,
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M45PE10",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M45PE10,
		.total_size	= 128,
		.page_size	= 256,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {256, 512} },
				.block_erase = SPI_BLOCK_ERASE_DB,
			}, {
				.eraseblocks = { {64 * 1024, 2} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
		.unlock		= NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
		.write		= SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M45PE16",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M45PE16,
		.total_size	= 2048,
		.page_size	= 256,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {256, 8192} },
				.block_erase = SPI_BLOCK_ERASE_DB,
			}, {
				.eraseblocks = { {64 * 1024, 32} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
		.unlock		= NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
		.write		= SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M45PE20",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M45PE20,
		.total_size	= 256,
		.page_size	= 256,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {256, 1024} },
				.block_erase = SPI_BLOCK_ERASE_DB,
			}, {
				.eraseblocks = { {64 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
		.unlock		= NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
		.write		= SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M45PE40",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M45PE40,
		.total_size	= 512,
		.page_size	= 256,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {256, 2048} },
				.block_erase = SPI_BLOCK_ERASE_DB,
			}, {
				.eraseblocks = { {64 * 1024, 8} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
		.unlock		= NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
		.write		= SPI_CHIP_WRITE256, /* Page write supported (similar to PP but allows 0->1 changes) */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "M45PE80",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_M45PE80,
		.total_size	= 1024,
		.page_size	= 256,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {256, 4096} },
				.block_erase = SPI_BLOCK_ERASE_DB,
			}, {
				.eraseblocks = { {64 * 1024, 16} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
		.unlock		= NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
		.write		= SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q00A..1G", /* ..1G = 1.8V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q00A__1G,
		.total_size	= 131072,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 32768} },
				.block_erase = SPI_BLOCK_ERASE_21,
			}, {
				.eraseblocks = { {4 * 1024, 32768} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 2048} },
				.block_erase = SPI_BLOCK_ERASE_DC,
			}, {
				.eraseblocks = { {64 * 1024, 2048} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {32768 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_C4,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {1700, 2000},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q00A..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q00A__3G,
		.total_size	= 131072,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 32768} },
				.block_erase = SPI_BLOCK_ERASE_21,
			}, {
				.eraseblocks = { {4 * 1024, 32768} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 2048} },
				.block_erase = SPI_BLOCK_ERASE_DC,
			}, {
				.eraseblocks = { {64 * 1024, 2048} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {32768 * 1024, 4} },
				.block_erase = SPI_BLOCK_ERASE_C4,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q016",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q016__1E,
		.total_size	= 2048,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 512} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {32 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_52,
			}, {
				.eraseblocks = { {64 * 1024, 32} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {2 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {1700, 2000},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q032..1E",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q032__1E,
		.total_size	= 4096,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 1024} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {4 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {1700, 2000},
		.reg_bits	=
		{
			/*
			 * There is also a volatile lock register per 64KiB sector, which is not
			 * mutually exclusive with BP-based protection.
			 */
			.srp    = {STATUS1, 7, RW},
			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
			.tb     = {STATUS1, 5, RW},
		},
		.decode_range	= DECODE_RANGE_SPI25,
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q032..3E",
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q032__3E,
		.total_size	= 4096,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 1024} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 64} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {4 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {2700, 3600},
		.reg_bits	=
		{
			/*
			 * There is also a volatile lock register per 64KiB sector, which is not
			 * mutually exclusive with BP-based protection.
			 */
			.srp    = {STATUS1, 7, RW},
			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
			.tb     = {STATUS1, 5, RW},
		},
		.decode_range	= DECODE_RANGE_SPI25,
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q064__1E,
		.total_size	= 8192,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 2048 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 128} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {8 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {1700, 2000},
		.reg_bits	=
		{
			/*
			 * There is also a volatile lock register per 64KiB sector, which is not
			 * mutually exclusive with BP-based protection.
			 */
			.srp    = {STATUS1, 7, RW},
			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 6, RW}},
			.tb     = {STATUS1, 5, RW},
		},
		.decode_range	= DECODE_RANGE_SPI25,
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q064__3E,
		.total_size	= 8192,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 2048 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 128} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {8 * 1024 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {2700, 3600},
		.reg_bits	=
		{
			/*
			 * There is also a volatile lock register per 64KiB sector, which is not
			 * mutually exclusive with BP-based protection.
			 */
			.srp    = {STATUS1, 7, RW},
			.bp     = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 6, RW}},
			.tb     = {STATUS1, 5, RW},
		},
		.decode_range	= DECODE_RANGE_SPI25,
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q128__1E,
		.total_size	= 16384,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 4096 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 256} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {16384 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {1700, 2000},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q128__3E,
		.total_size	= 16384,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 4096 } },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 256} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {16384 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q256..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q256__1E,
		.total_size	= 32768,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 8192} },
				.block_erase = SPI_BLOCK_ERASE_21,
			}, {
				.eraseblocks = { {4 * 1024, 8192} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 512} },
				.block_erase = SPI_BLOCK_ERASE_DC,
			}, {
				.eraseblocks = { {64 * 1024, 512} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {32768 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {1700, 2000},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q256..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q256__3E,
		.total_size	= 32768,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 8192} },
				.block_erase = SPI_BLOCK_ERASE_21,
			}, {
				.eraseblocks = { {4 * 1024, 8192} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 512} },
				.block_erase = SPI_BLOCK_ERASE_DC,
			}, {
				.eraseblocks = { {64 * 1024, 512} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {32768 * 1024, 1} },
				.block_erase = SPI_BLOCK_ERASE_C7,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {2700, 3600},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q512..1G", /* ..1G = 1.8V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q512__1G,
		.total_size	= 65536,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
		.tested		= TEST_UNTESTED,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 16384} },
				.block_erase = SPI_BLOCK_ERASE_21,
			}, {
				.eraseblocks = { {4 * 1024, 16384} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 1024} },
				.block_erase = SPI_BLOCK_ERASE_DC,
			}, {
				.eraseblocks = { {64 * 1024, 1024} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {32768 * 1024, 2} },
				.block_erase = SPI_BLOCK_ERASE_C4,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {1700, 2000},
	},

	{
		.vendor		= "Micron/Numonyx/ST",
		.name		= "N25Q512..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */
		.bustype	= BUS_SPI,
		.manufacture_id	= ST_ID,
		.model_id	= ST_N25Q512__3G,
		.total_size	= 65536,
		.page_size	= 256,
		/* supports SFDP */
		/* OTP: 64B total; read 0x4B, write 0x42 */
		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
		.tested		= TEST_OK_PREW,
		.probe		= PROBE_SPI_RDID,
		.probe_timing	= TIMING_ZERO,
		.block_erasers	=
		{
			{
				.eraseblocks = { {4 * 1024, 16384} },
				.block_erase = SPI_BLOCK_ERASE_21,
			}, {
				.eraseblocks = { {4 * 1024, 16384} },
				.block_erase = SPI_BLOCK_ERASE_20,
			}, {
				.eraseblocks = { {64 * 1024, 1024} },
				.block_erase = SPI_BLOCK_ERASE_DC,
			}, {
				.eraseblocks = { {64 * 1024, 1024} },
				.block_erase = SPI_BLOCK_ERASE_D8,
			}, {
				.eraseblocks = { {32768 * 1024, 2} },
				.block_erase = SPI_BLOCK_ERASE_C4,
			}
		},
		.printlock	= SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
		.unlock		= SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
		.write		= SPI_CHIP_WRITE256, /* Multi I/O supported */
		.read		= SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
		.voltage	= {2700, 3600},
	},