# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright (C) 2000-2012 by George Williams # Copyright (C) 2012 by Barry Schwartz # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # # Redistributions of source code must retain the above copyright notice, this # list of conditions and the following disclaimer. # # Redistributions in binary form must reproduce the above copyright notice, # this list of conditions and the following disclaimer in the documentation # and/or other materials provided with the distribution. # # The name of the author may not be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = desktop ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \ $(top_srcdir)/m4/ax_code_coverage.m4 \ $(top_srcdir)/m4/ax_pthread.m4 \ $(top_srcdir)/m4/fontforge_arg_enable.m4 \ $(top_srcdir)/m4/fontforge_arg_with.m4 \ $(top_srcdir)/m4/fontforge_config_freetype_debugger.m4 \ $(top_srcdir)/m4/fontforge_config_x_libraries.m4 \ $(top_srcdir)/m4/fontforge_create_pkg-config_files.m4 \ $(top_srcdir)/m4/fontforge_platform_specifics.m4 \ $(top_srcdir)/m4/fontforge_search_libs.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/inc/fontforge-config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(appdatadir)" "$(DESTDIR)$(deskpixsdir)" \ "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(hicolor128x128dir)" \ "$(DESTDIR)$(hicolor16x16dir)" "$(DESTDIR)$(hicolor22x22dir)" \ "$(DESTDIR)$(hicolor24x24dir)" \ "$(DESTDIR)$(hicolor256x256dir)" \ "$(DESTDIR)$(hicolor32x32dir)" "$(DESTDIR)$(hicolor48x48dir)" \ "$(DESTDIR)$(hicolor512x512dir)" \ "$(DESTDIR)$(hicolor64x64dir)" \ "$(DESTDIR)$(hicolorscalabledir)" "$(DESTDIR)$(metainfodir)" \ "$(DESTDIR)$(mimepackagesdir)" DATA = $(appdata_DATA) $(deskpixs_DATA) $(desktop_DATA) \ $(hicolor128x128_DATA) $(hicolor16x16_DATA) \ $(hicolor22x22_DATA) $(hicolor24x24_DATA) \ $(hicolor256x256_DATA) $(hicolor32x32_DATA) \ $(hicolor48x48_DATA) $(hicolor512x512_DATA) \ $(hicolor64x64_DATA) $(hicolorscalable_DATA) $(metainfo_DATA) \ $(mimepackages_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BLANK1 = @BLANK1@ BLANK2 = @BLANK2@ CARBON = @CARBON@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ COCOA = @COCOA@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ CORESERVICES = @CORESERVICES@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ FONTFORGE_GIT_VERSION = @FONTFORGE_GIT_VERSION@ FONTFORGE_MODTIME_RAW = @FONTFORGE_MODTIME_RAW@ FONTFORGE_MODTIME_STR = @FONTFORGE_MODTIME_STR@ FONTFORGE_VERSION = @FONTFORGE_VERSION@ FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ FREETYPE_LIBS = @FREETYPE_LIBS@ FREETYPE_SOURCE = @FREETYPE_SOURCE@ GCOV = @GCOV@ GDK_CFLAGS = @GDK_CFLAGS@ GDK_LIBS = @GDK_LIBS@ GENHTML = @GENHTML@ GIFLIB_CFLAGS = @GIFLIB_CFLAGS@ GIFLIB_LIBS = @GIFLIB_LIBS@ GIO_UNIX_CFLAGS = @GIO_UNIX_CFLAGS@ GIO_UNIX_LIBS = @GIO_UNIX_LIBS@ GLIB_CFLAGS = @GLIB_CFLAGS@ GLIB_LIBS = @GLIB_LIBS@ GREP = @GREP@ HOST = @HOST@ ICONV_CFLAGS = @ICONV_CFLAGS@ ICONV_LIBS = @ICONV_LIBS@ INDENT = @INDENT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBCAIRO_CFLAGS = @LIBCAIRO_CFLAGS@ LIBCAIRO_LIBS = @LIBCAIRO_LIBS@ LIBFONTFORGEEXE_PKGCONFIG_LIBS = @LIBFONTFORGEEXE_PKGCONFIG_LIBS@ LIBFONTFORGEEXE_PKGCONFIG_LIBS_PRIVATE = @LIBFONTFORGEEXE_PKGCONFIG_LIBS_PRIVATE@ LIBFONTFORGEEXE_PKGCONFIG_REQUIRES = @LIBFONTFORGEEXE_PKGCONFIG_REQUIRES@ LIBFONTFORGEEXE_PKGCONFIG_REQUIRES_PRIVATE = @LIBFONTFORGEEXE_PKGCONFIG_REQUIRES_PRIVATE@ LIBFONTFORGEEXE_PKGCONFIG_VERSION = @LIBFONTFORGEEXE_PKGCONFIG_VERSION@ LIBFONTFORGEEXE_VERSION = @LIBFONTFORGEEXE_VERSION@ LIBFONTFORGE_PKGCONFIG_LIBS = @LIBFONTFORGE_PKGCONFIG_LIBS@ LIBFONTFORGE_PKGCONFIG_LIBS_PRIVATE = @LIBFONTFORGE_PKGCONFIG_LIBS_PRIVATE@ LIBFONTFORGE_PKGCONFIG_REQUIRES = @LIBFONTFORGE_PKGCONFIG_REQUIRES@ LIBFONTFORGE_PKGCONFIG_REQUIRES_PRIVATE = @LIBFONTFORGE_PKGCONFIG_REQUIRES_PRIVATE@ LIBFONTFORGE_PKGCONFIG_VERSION = @LIBFONTFORGE_PKGCONFIG_VERSION@ LIBFONTFORGE_VERSION = @LIBFONTFORGE_VERSION@ LIBGDRAW_VERSION = @LIBGDRAW_VERSION@ LIBGUNICODE_VERSION = @LIBGUNICODE_VERSION@ LIBGUTILS_VERSION = @LIBGUTILS_VERSION@ LIBJPEG_CFLAGS = @LIBJPEG_CFLAGS@ LIBJPEG_LIBS = @LIBJPEG_LIBS@ LIBOBJS = @LIBOBJS@ LIBPNG_CFLAGS = @LIBPNG_CFLAGS@ LIBPNG_LIBS = @LIBPNG_LIBS@ LIBREADLINE_CFLAGS = @LIBREADLINE_CFLAGS@ LIBREADLINE_LIBS = @LIBREADLINE_LIBS@ LIBS = @LIBS@ LIBSPIRO_CFLAGS = @LIBSPIRO_CFLAGS@ LIBSPIRO_LIBS = @LIBSPIRO_LIBS@ LIBTIFF_CFLAGS = @LIBTIFF_CFLAGS@ LIBTIFF_LIBS = @LIBTIFF_LIBS@ LIBTOOL = @LIBTOOL@ LIBUNINAMESLIST_CFLAGS = @LIBUNINAMESLIST_CFLAGS@ LIBUNINAMESLIST_LIBS = @LIBUNINAMESLIST_LIBS@ LIBXML_CFLAGS = @LIBXML_CFLAGS@ LIBXML_LIBS = @LIBXML_LIBS@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MACAPP = @MACAPP@ MAINT = @MAINT@ MAINTAINER_TOOLS = @MAINTAINER_TOOLS@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MY_CFLAGS = @MY_CFLAGS@ MY_LIBS = @MY_LIBS@ MY_LIB_LDFLAGS = @MY_LIB_LDFLAGS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJC = @OBJC@ OBJCDEPMODE = @OBJCDEPMODE@ OBJCFLAGS = @OBJCFLAGS@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGOCAIRO_CFLAGS = @PANGOCAIRO_CFLAGS@ PANGOCAIRO_LIBS = @PANGOCAIRO_LIBS@ PANGO_CFLAGS = @PANGO_CFLAGS@ PANGO_LIBS = @PANGO_LIBS@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PLUTIL = @PLUTIL@ PO_TRACE = @PO_TRACE@ PTHREAD_CC = @PTHREAD_CC@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_LIBS = @PTHREAD_LIBS@ PYHOOK_FILE_EXTENSION = @PYHOOK_FILE_EXTENSION@ PYTHON = @PYTHON@ PYTHONDEV_CFLAGS = @PYTHONDEV_CFLAGS@ PYTHONDEV_LIBS = @PYTHONDEV_LIBS@ PYTHON_CFLAGS = @PYTHON_CFLAGS@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_LIBS = @PYTHON_LIBS@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ RAW_COMPILE_PLATFORM_CFLAGS = @RAW_COMPILE_PLATFORM_CFLAGS@ SDK = @SDK@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ THE_PROGRAMS = @THE_PROGRAMS@ UNZIP = @UNZIP@ UPDATE_DESKTOP_DATABASE = @UPDATE_DESKTOP_DATABASE@ UPDATE_MIME_DATABASE = @UPDATE_MIME_DATABASE@ VERSION = @VERSION@ VERSION_MAJOR = @VERSION_MAJOR@ VERSION_MINOR = @VERSION_MINOR@ VERSION_PATCH = @VERSION_PATCH@ WGET = @WGET@ WOFF2_CFLAGS = @WOFF2_CFLAGS@ WOFF2_LIBS = @WOFF2_LIBS@ XGETTEXT = @XGETTEXT@ XINPUT_LIBS = @XINPUT_LIBS@ XKB_LIBS = @XKB_LIBS@ XMKMF = @XMKMF@ X_CFLAGS = @X_CFLAGS@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_LIBS = @X_LIBS@ X_PRE_LIBS = @X_PRE_LIBS@ ZLIB_CFLAGS = @ZLIB_CFLAGS@ ZLIB_LIBS = @ZLIB_LIBS@ _GIFLIB_5PLUS = @_GIFLIB_5PLUS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ac_ct_OBJC = @ac_ct_OBJC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ ax_pthread_config = @ax_pthread_config@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ PACKAGEROOTDIR = ${datarootdir} # Where .desktop files go. desktopdir = $(PACKAGEROOTDIR)/applications desktop_DATA = org.fontforge.FontForge.desktop appdatadir = $(PACKAGEROOTDIR)/appdata appdata_DATA = org.fontforge.FontForge.appdata.xml # Where metainfo xml files go metainfodir = $(PACKAGEROOTDIR)/metainfo metainfo_DATA = org.fontforge.FontForge.metainfo.xml org.fontforge.FontForge.appdata.xml # Where MIME data goes. (Support for .sfd files, for instance.) mimedir = $(PACKAGEROOTDIR)/mime mimepackagesdir = $(PACKAGEROOTDIR)/mime/packages mimepackages_DATA = fontforge.xml @USE_THEME_2012_TRUE@ICON_SRC = $(srcdir)/2012 # Where desktop icons go. @USE_THEME_TANGO_TRUE@ICON_SRC = $(srcdir)/tango ICONSDIR = $(PACKAGEROOTDIR)/icons HICOLORDIR = $(ICONSDIR)/hicolor hicolor16x16dir = $(HICOLORDIR)/16x16/apps hicolor22x22dir = $(HICOLORDIR)/22x22/apps hicolor24x24dir = $(HICOLORDIR)/24x24/apps hicolor32x32dir = $(HICOLORDIR)/32x32/apps hicolor48x48dir = $(HICOLORDIR)/48x48/apps hicolor64x64dir = $(HICOLORDIR)/64x64/apps hicolor128x128dir = $(HICOLORDIR)/128x128/apps hicolor256x256dir = $(HICOLORDIR)/256x256/apps hicolor512x512dir = $(HICOLORDIR)/512x512/apps hicolorscalabledir = $(HICOLORDIR)/scalable/apps hicolor16x16_DATA = $(ICON_SRC)/16x16/org.fontforge.FontForge.png hicolor22x22_DATA = $(ICON_SRC)/22x22/org.fontforge.FontForge.png hicolor24x24_DATA = $(ICON_SRC)/24x24/org.fontforge.FontForge.png hicolor32x32_DATA = $(ICON_SRC)/32x32/org.fontforge.FontForge.png hicolor48x48_DATA = $(ICON_SRC)/48x48/org.fontforge.FontForge.png hicolor64x64_DATA = $(ICON_SRC)/64x64/org.fontforge.FontForge.png hicolor128x128_DATA = $(ICON_SRC)/128x128/org.fontforge.FontForge.png hicolor256x256_DATA = $(ICON_SRC)/256x256/org.fontforge.FontForge.png hicolor512x512_DATA = $(ICON_SRC)/512x512/org.fontforge.FontForge.png hicolorscalable_DATA = $(ICON_SRC)/scalable/org.fontforge.FontForge.svg deskpixsdir = $(PACKAGEROOTDIR)/pixmaps deskpixs_DATA = $(ICON_SRC)/pixmaps/org.fontforge.FontForge.xpm \ $(ICON_SRC)/32x32/org.fontforge.FontForge.png EXTRA_DIST = \ 2012/src/icon-16x16-apps-fontforge.svg \ 2012/src/icon-24x24-apps-fontforge.svg \ 2012/src/icon-32x32-apps-fontforge.svg \ 2012/16x16/org.fontforge.FontForge.png \ 2012/22x22/org.fontforge.FontForge.png \ 2012/24x24/org.fontforge.FontForge.png \ 2012/32x32/org.fontforge.FontForge.png \ 2012/48x48/org.fontforge.FontForge.png \ 2012/64x64/org.fontforge.FontForge.png \ 2012/128x128/org.fontforge.FontForge.png \ 2012/256x256/org.fontforge.FontForge.png \ 2012/512x512/org.fontforge.FontForge.png \ 2012/pixmaps/org.fontforge.FontForge.xpm \ 2012/scalable/org.fontforge.FontForge.svg \ tango/src/icon-16x16-apps-fontforge.svg \ tango/src/icon-24x24-apps-fontforge.svg \ tango/src/icon-32x32-apps-fontforge.svg \ tango/16x16/org.fontforge.FontForge.png \ tango/22x22/org.fontforge.FontForge.png \ tango/24x24/org.fontforge.FontForge.png \ tango/32x32/org.fontforge.FontForge.png \ tango/48x48/org.fontforge.FontForge.png \ tango/64x64/org.fontforge.FontForge.png \ tango/128x128/org.fontforge.FontForge.png \ tango/256x256/org.fontforge.FontForge.png \ tango/512x512/org.fontforge.FontForge.png \ tango/pixmaps/org.fontforge.FontForge.xpm \ tango/scalable/org.fontforge.FontForge.svg \ icons-older/ffanvil32.gif \ icons-older/FFbutton-32.png \ icons-older/FFslug-32.png \ icons-older/fontforge.png \ icons-older/fontforge.xpm \ icons-older/FFbutton-128.png \ icons-older/FFslug-128.png \ icons-older/FFslug-48.png \ icons-older/fontforge.svg \ org.fontforge.FontForge.appdata.xml \ org.fontforge.FontForge.desktop \ fontforge.xml \ org.fontforge.FontForge.metainfo.xml all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign desktop/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign desktop/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-appdataDATA: $(appdata_DATA) @$(NORMAL_INSTALL) @list='$(appdata_DATA)'; test -n "$(appdatadir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(appdatadir)'"; \ $(MKDIR_P) "$(DESTDIR)$(appdatadir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdatadir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(appdatadir)" || exit $$?; \ done uninstall-appdataDATA: @$(NORMAL_UNINSTALL) @list='$(appdata_DATA)'; test -n "$(appdatadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(appdatadir)'; $(am__uninstall_files_from_dir) install-deskpixsDATA: $(deskpixs_DATA) @$(NORMAL_INSTALL) @list='$(deskpixs_DATA)'; test -n "$(deskpixsdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(deskpixsdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(deskpixsdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(deskpixsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(deskpixsdir)" || exit $$?; \ done uninstall-deskpixsDATA: @$(NORMAL_UNINSTALL) @list='$(deskpixs_DATA)'; test -n "$(deskpixsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(deskpixsdir)'; $(am__uninstall_files_from_dir) install-desktopDATA: $(desktop_DATA) @$(NORMAL_INSTALL) @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \ done uninstall-desktopDATA: @$(NORMAL_UNINSTALL) @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir) install-hicolor128x128DATA: $(hicolor128x128_DATA) @$(NORMAL_INSTALL) @list='$(hicolor128x128_DATA)'; test -n "$(hicolor128x128dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor128x128dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor128x128dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor128x128dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor128x128dir)" || exit $$?; \ done uninstall-hicolor128x128DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor128x128_DATA)'; test -n "$(hicolor128x128dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor128x128dir)'; $(am__uninstall_files_from_dir) install-hicolor16x16DATA: $(hicolor16x16_DATA) @$(NORMAL_INSTALL) @list='$(hicolor16x16_DATA)'; test -n "$(hicolor16x16dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor16x16dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor16x16dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor16x16dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor16x16dir)" || exit $$?; \ done uninstall-hicolor16x16DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor16x16_DATA)'; test -n "$(hicolor16x16dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor16x16dir)'; $(am__uninstall_files_from_dir) install-hicolor22x22DATA: $(hicolor22x22_DATA) @$(NORMAL_INSTALL) @list='$(hicolor22x22_DATA)'; test -n "$(hicolor22x22dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor22x22dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor22x22dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor22x22dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor22x22dir)" || exit $$?; \ done uninstall-hicolor22x22DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor22x22_DATA)'; test -n "$(hicolor22x22dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor22x22dir)'; $(am__uninstall_files_from_dir) install-hicolor24x24DATA: $(hicolor24x24_DATA) @$(NORMAL_INSTALL) @list='$(hicolor24x24_DATA)'; test -n "$(hicolor24x24dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor24x24dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor24x24dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor24x24dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor24x24dir)" || exit $$?; \ done uninstall-hicolor24x24DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor24x24_DATA)'; test -n "$(hicolor24x24dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor24x24dir)'; $(am__uninstall_files_from_dir) install-hicolor256x256DATA: $(hicolor256x256_DATA) @$(NORMAL_INSTALL) @list='$(hicolor256x256_DATA)'; test -n "$(hicolor256x256dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor256x256dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor256x256dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor256x256dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor256x256dir)" || exit $$?; \ done uninstall-hicolor256x256DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor256x256_DATA)'; test -n "$(hicolor256x256dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor256x256dir)'; $(am__uninstall_files_from_dir) install-hicolor32x32DATA: $(hicolor32x32_DATA) @$(NORMAL_INSTALL) @list='$(hicolor32x32_DATA)'; test -n "$(hicolor32x32dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor32x32dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor32x32dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor32x32dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor32x32dir)" || exit $$?; \ done uninstall-hicolor32x32DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor32x32_DATA)'; test -n "$(hicolor32x32dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor32x32dir)'; $(am__uninstall_files_from_dir) install-hicolor48x48DATA: $(hicolor48x48_DATA) @$(NORMAL_INSTALL) @list='$(hicolor48x48_DATA)'; test -n "$(hicolor48x48dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor48x48dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor48x48dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor48x48dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor48x48dir)" || exit $$?; \ done uninstall-hicolor48x48DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor48x48_DATA)'; test -n "$(hicolor48x48dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor48x48dir)'; $(am__uninstall_files_from_dir) install-hicolor512x512DATA: $(hicolor512x512_DATA) @$(NORMAL_INSTALL) @list='$(hicolor512x512_DATA)'; test -n "$(hicolor512x512dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor512x512dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor512x512dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor512x512dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor512x512dir)" || exit $$?; \ done uninstall-hicolor512x512DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor512x512_DATA)'; test -n "$(hicolor512x512dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor512x512dir)'; $(am__uninstall_files_from_dir) install-hicolor64x64DATA: $(hicolor64x64_DATA) @$(NORMAL_INSTALL) @list='$(hicolor64x64_DATA)'; test -n "$(hicolor64x64dir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolor64x64dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolor64x64dir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolor64x64dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolor64x64dir)" || exit $$?; \ done uninstall-hicolor64x64DATA: @$(NORMAL_UNINSTALL) @list='$(hicolor64x64_DATA)'; test -n "$(hicolor64x64dir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolor64x64dir)'; $(am__uninstall_files_from_dir) install-hicolorscalableDATA: $(hicolorscalable_DATA) @$(NORMAL_INSTALL) @list='$(hicolorscalable_DATA)'; test -n "$(hicolorscalabledir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(hicolorscalabledir)'"; \ $(MKDIR_P) "$(DESTDIR)$(hicolorscalabledir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(hicolorscalabledir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(hicolorscalabledir)" || exit $$?; \ done uninstall-hicolorscalableDATA: @$(NORMAL_UNINSTALL) @list='$(hicolorscalable_DATA)'; test -n "$(hicolorscalabledir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(hicolorscalabledir)'; $(am__uninstall_files_from_dir) install-metainfoDATA: $(metainfo_DATA) @$(NORMAL_INSTALL) @list='$(metainfo_DATA)'; test -n "$(metainfodir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(metainfodir)'"; \ $(MKDIR_P) "$(DESTDIR)$(metainfodir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(metainfodir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(metainfodir)" || exit $$?; \ done uninstall-metainfoDATA: @$(NORMAL_UNINSTALL) @list='$(metainfo_DATA)'; test -n "$(metainfodir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(metainfodir)'; $(am__uninstall_files_from_dir) install-mimepackagesDATA: $(mimepackages_DATA) @$(NORMAL_INSTALL) @list='$(mimepackages_DATA)'; test -n "$(mimepackagesdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(mimepackagesdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(mimepackagesdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(mimepackagesdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(mimepackagesdir)" || exit $$?; \ done uninstall-mimepackagesDATA: @$(NORMAL_UNINSTALL) @list='$(mimepackages_DATA)'; test -n "$(mimepackagesdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(mimepackagesdir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(appdatadir)" "$(DESTDIR)$(deskpixsdir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(hicolor128x128dir)" "$(DESTDIR)$(hicolor16x16dir)" "$(DESTDIR)$(hicolor22x22dir)" "$(DESTDIR)$(hicolor24x24dir)" "$(DESTDIR)$(hicolor256x256dir)" "$(DESTDIR)$(hicolor32x32dir)" "$(DESTDIR)$(hicolor48x48dir)" "$(DESTDIR)$(hicolor512x512dir)" "$(DESTDIR)$(hicolor64x64dir)" "$(DESTDIR)$(hicolorscalabledir)" "$(DESTDIR)$(metainfodir)" "$(DESTDIR)$(mimepackagesdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-appdataDATA install-deskpixsDATA \ install-desktopDATA install-hicolor128x128DATA \ install-hicolor16x16DATA install-hicolor22x22DATA \ install-hicolor24x24DATA install-hicolor256x256DATA \ install-hicolor32x32DATA install-hicolor48x48DATA \ install-hicolor512x512DATA install-hicolor64x64DATA \ install-hicolorscalableDATA install-metainfoDATA \ install-mimepackagesDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-appdataDATA uninstall-deskpixsDATA \ uninstall-desktopDATA uninstall-hicolor128x128DATA \ uninstall-hicolor16x16DATA uninstall-hicolor22x22DATA \ uninstall-hicolor24x24DATA uninstall-hicolor256x256DATA \ uninstall-hicolor32x32DATA uninstall-hicolor48x48DATA \ uninstall-hicolor512x512DATA uninstall-hicolor64x64DATA \ uninstall-hicolorscalableDATA uninstall-metainfoDATA \ uninstall-mimepackagesDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-appdataDATA install-data \ install-data-am install-deskpixsDATA install-desktopDATA \ install-dvi install-dvi-am install-exec install-exec-am \ install-hicolor128x128DATA install-hicolor16x16DATA \ install-hicolor22x22DATA install-hicolor24x24DATA \ install-hicolor256x256DATA install-hicolor32x32DATA \ install-hicolor48x48DATA install-hicolor512x512DATA \ install-hicolor64x64DATA install-hicolorscalableDATA \ install-html install-html-am install-info install-info-am \ install-man install-metainfoDATA install-mimepackagesDATA \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am uninstall-appdataDATA \ uninstall-deskpixsDATA uninstall-desktopDATA \ uninstall-hicolor128x128DATA uninstall-hicolor16x16DATA \ uninstall-hicolor22x22DATA uninstall-hicolor24x24DATA \ uninstall-hicolor256x256DATA uninstall-hicolor32x32DATA \ uninstall-hicolor48x48DATA uninstall-hicolor512x512DATA \ uninstall-hicolor64x64DATA uninstall-hicolorscalableDATA \ uninstall-metainfoDATA uninstall-mimepackagesDATA .PRECIOUS: Makefile -include $(top_srcdir)/git.mk # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: