# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Some common rules for building gnumeric docs. # These will be changed as the documentation format changes # but it is a start. # # Requires that the calling makefile define 'lang' # # No modifications of this Makefile should be necessary. # # To use this template: # 1) Define: figdir, docname, lang, omffile, and entities in # your Makefile.am file for each document directory, # although figdir, omffile, and entities may be empty # 2) Make sure the Makefile in (1) also includes # "include $(top_srcdir)/xmldocs.make" and # "dist-hook: app-dist-hook". # 3) Optionally define 'entities' to hold xml entities which # you would also like installed # 4) Figures must go under $(figdir)/ and be in PNG format # 5) You should only have one document per directory # 6) Note that the figure directory, $(figdir)/, should not have its # own Makefile since this Makefile installs those figures. # # example Makefile.am: # figdir = figures # docname = scrollkeeper-manual # lang = C # omffile=scrollkeeper-manual-C.omf # entities = fdl.xml # include $(top_srcdir)/xmldocs.make # dist-hook: app-dist-hook # # About this file: # This file was taken from scrollkeeper_example2, a package illustrating # how to install documentation and OMF files for use with ScrollKeeper # 0.3.x and 0.4.x. For more information, see: # http://scrollkeeper.sourceforge.net/ # Version: 0.1.2 (last updated: March 20, 2002) # # # No modifications of this Makefile should be necessary. # # This file contains the build instructions for installing OMF files. It is # generally called from the makefiles for particular formats of documentation. # # Note that you must configure your package with --localstatedir=/var # so that the scrollkeeper-update command below will update the database # in the standard scrollkeeper directory. # # If it is impossible to configure with --localstatedir=/var, then # modify the definition of scrollkeeper_localstate_dir so that # it points to the correct location. Note that you must still use # $(localstatedir) in this or when people build RPMs it will update # the real database on their system instead of the one under RPM_BUILD_ROOT. # # Note: This make file is not incorporated into xmldocs.make because, in # general, there will be other documents install besides XML documents # and the makefiles for these formats should also include this file. # # About this file: # This file was derived from scrollkeeper_example2, a package # illustrating how to install documentation and OMF files for use with # ScrollKeeper 0.3.x and 0.4.x. For more information, see: # http://scrollkeeper.sourceforge.net/ # Version: 0.1.3 (last updated: March 20, 2002) # VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(top_srcdir)/doc/gnumeric-doc.make \ $(top_srcdir)/xmldocs.make $(top_srcdir)/omf.make \ $(srcdir)/Makefile.in $(srcdir)/Makefile.am ChangeLog README @ENABLE_PDFDOCS_TRUE@am__append_1 = gnumeric.pdf @WITH_WIN32_TRUE@am__append_2 = gnumeric.chm gnumeric.hhmap @ENABLE_PDFDOCS_TRUE@am__append_3 = gnumeric.pdf subdir = doc/C ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/gnumeric-config.h \ $(top_builddir)/gnumeric-features.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(manpagedir)" "$(DESTDIR)$(winhelpdir)" DATA = $(manpage_DATA) $(noinst_DATA) $(winhelp_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ COMPONENT_DIR = @COMPONENT_DIR@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DBCONTEXT = @DBCONTEXT@ DBLATEX = @DBLATEX@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GDA_CFLAGS = @GDA_CFLAGS@ GDA_LIBS = @GDA_LIBS@ GDK_PIXBUF_CSOURCE = @GDK_PIXBUF_CSOURCE@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GIRDIR = @GIRDIR@ GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GNM_PY_CFLAGS = @GNM_PY_CFLAGS@ GNM_PY_LDFLAGS = @GNM_PY_LDFLAGS@ GNM_PY_LIBADD = @GNM_PY_LIBADD@ GNOMEDB_CFLAGS = @GNOMEDB_CFLAGS@ GNOMEDB_LIBS = @GNOMEDB_LIBS@ GNUMERIC_API_VER = @GNUMERIC_API_VER@ GNUMERIC_API_VER_ = @GNUMERIC_API_VER_@ GNUMERIC_CFLAGS = @GNUMERIC_CFLAGS@ GNUMERIC_LIBS = @GNUMERIC_LIBS@ GNUMERIC_PLUGIN_LDFLAGS = @GNUMERIC_PLUGIN_LDFLAGS@ GOFFICE_API_VER = @GOFFICE_API_VER@ GOFFICE_PLUGINS_DIR = @GOFFICE_PLUGINS_DIR@ GOFFICE_VERSION = @GOFFICE_VERSION@ GREP = @GREP@ GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ GUILE_INCS = @GUILE_INCS@ GUILE_LIBS = @GUILE_LIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ LD = @LD@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBSPREADSHEET_CFLAGS = @LIBSPREADSHEET_CFLAGS@ LIBSPREADSHEET_LIBS = @LIBSPREADSHEET_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARADOX_CFLAGS = @PARADOX_CFLAGS@ PARADOX_LIBS = @PARADOX_LIBS@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PERL_CC = @PERL_CC@ PERL_CCCDLFLAGS = @PERL_CCCDLFLAGS@ PERL_CCOPTS = @PERL_CCOPTS@ PERL_LD = @PERL_LD@ PERL_LDDLFLAGS = @PERL_LDDLFLAGS@ PERL_LDOPTS = @PERL_LDOPTS@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ PLUGIN_LIST = @PLUGIN_LIST@ POFILES = @POFILES@ POFILES_FULL = @POFILES_FULL@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ PSICONV_CFLAGS = @PSICONV_CFLAGS@ PSICONV_CONFIG = @PSICONV_CONFIG@ PSICONV_LIBS = @PSICONV_LIBS@ PYGOBJECT_CFLAGS = @PYGOBJECT_CFLAGS@ PYGOBJECT_LIBS = @PYGOBJECT_LIBS@ PYTHON = @PYTHON@ RANLIB = @RANLIB@ SCROLLKEEPER_PREINSTALL = @SCROLLKEEPER_PREINSTALL@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TYPELIBDIR = @TYPELIBDIR@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ VERSION_IFACE = @VERSION_IFACE@ VERSION_INFO = @VERSION_INFO@ WARN_CFLAGS = @WARN_CFLAGS@ WINDRES = @WINDRES@ XGETTEXT = @XGETTEXT@ YACC = @YACC@ YFLAGS = @YFLAGS@ YYYYMMDD = @YYYYMMDD@ Z_CPPFLAGS = @Z_CPPFLAGS@ Z_LIBS = @Z_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ # ********** Begin of section some packagers may need to modify ********** # This variable (docdir) specifies where the documents should be installed. # This default value should work for most packages. docdir = $(datadir)/gnome/help/$(docname)/$(lang) dvidir = @dvidir@ exec_prefix = @exec_prefix@ gnumeric_datadir = @gnumeric_datadir@ gnumeric_externplugindir = @gnumeric_externplugindir@ gnumeric_icondir = @gnumeric_icondir@ gnumeric_libdir = @gnumeric_libdir@ gnumeric_localedir = @gnumeric_localedir@ gnumeric_plugindir = @gnumeric_plugindir@ gsettingsschemadir = @gsettingsschemadir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ intltool__v_merge_options_ = @intltool__v_merge_options_@ intltool__v_merge_options_0 = @intltool__v_merge_options_0@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = figures lang = C locale = C entities = about-authors.xml about-history.xml about-license.xml \ analysis-complexNumbers.xml analysis-goalseek.xml \ analysis-overview.xml analysis-scenarios.xml \ analysis-simulation.xml analysis-solver.xml \ analysis-statistical.xml appendix-glossary.xml \ appendix-keybindings.xml bugs.xml compiling.xml \ configuration-localization.xml configuration-overview.xml \ configuration-plugins.xml configuration-preferences.xml \ configuration-toolbars.xml data-commentNlink.xml \ data-delete.xml data-entry-advanced.xml \ data-entry-external.xml data-entry.xml data-format.xml \ data-format-conditional.xml data-generate.xml data-insert.xml \ data-modify.xml data-filter.xml data-move-copy.xml \ data-overview.xml data-selections.xml data-types.xml \ documenting.xml extending-functions.xml extending-overview.xml \ extending-plugins.xml extending-python.xml files-formats.xml \ files-email.xml files-opening.xml files-overview.xml \ files-saving.xml files-ssconvert.xml files-textopen.xml \ files-textsave.xml getting-involved.xml graphics-drawings.xml \ graphics-images.xml graphics-overview.xml graphics-plots.xml \ graphics-widgets.xml gui-menus.xml gui-mouse.xml \ gui-other-elements.xml gui-overview.xml gui-toolbars.xml \ installing.xml legal.xml manual-usage.xml morehelp.xml \ printing.xml quick-start.xml welcome.xml workbooks.xml \ worksheets.xml functions.xml # functions.xml # added in gnumeric-doc.make figdir = figures docname = gnumeric @WITH_SCROLLKEEPER_TRUE@omffile = gnumeric-$(lang).omf gnumeric_docdir = $(top_srcdir)/doc functions_xml_parts = func.defs func-header.xml func-footer.xml MOSTLYCLEANFILES = functions.out functions.tmp # ********** You should not have to edit below this line ********** xml_files = $(entities) $(docname).xml # Include generated files to simplify installation. # (Entities, including functions.xml, are shipped via xmldocs.make.) EXTRA_DIST = $(xml_files) $(omffile) $(functions_xml_parts) \ $(manpage_DATA) gnumeric-docbook-2-htmlhelp.xsl gnumeric-C.omf \ $(am__append_3) CLEANFILES = omf_timestamp omf_dest_dir = $(datadir)/omf/@PACKAGE@ scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper noinst_DATA = $(am__append_1) manpagedir = $(mandir)/man1 manpage_DATA = gnumeric.1 ssconvert.1 ssindex.1 ssgrep.1 ssdiff.1 winhelp_DATA = $(am__append_2) winhelpdir = $(gnumeric_datadir)/$(subdir) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/doc/gnumeric-doc.make $(top_srcdir)/xmldocs.make $(top_srcdir)/omf.make $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/C/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/C/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/doc/gnumeric-doc.make $(top_srcdir)/xmldocs.make $(top_srcdir)/omf.make: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-manpageDATA: $(manpage_DATA) @$(NORMAL_INSTALL) @list='$(manpage_DATA)'; test -n "$(manpagedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(manpagedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(manpagedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(manpagedir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(manpagedir)" || exit $$?; \ done uninstall-manpageDATA: @$(NORMAL_UNINSTALL) @list='$(manpage_DATA)'; test -n "$(manpagedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(manpagedir)'; $(am__uninstall_files_from_dir) install-winhelpDATA: $(winhelp_DATA) @$(NORMAL_INSTALL) @list='$(winhelp_DATA)'; test -n "$(winhelpdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(winhelpdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(winhelpdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(winhelpdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(winhelpdir)" || exit $$?; \ done uninstall-winhelpDATA: @$(NORMAL_UNINSTALL) @list='$(winhelp_DATA)'; test -n "$(winhelpdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(winhelpdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(manpagedir)" "$(DESTDIR)$(winhelpdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html-am: info: info-recursive info-am: install-data-am: install-data-local install-manpageDATA \ install-winhelpDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-local uninstall-manpageDATA \ uninstall-winhelpDATA .MAKE: $(am__recursive_targets) install-am install-data-am \ install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am clean clean-generic clean-libtool clean-local \ cscopelist-am ctags ctags-am dist-hook distclean \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-hook \ install-data-local install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-manpageDATA install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ install-winhelpDATA installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am uninstall-local \ uninstall-manpageDATA uninstall-winhelpDATA functions.xml: $(gnumeric_docdir)/make-func-list.pl $(functions_xml_parts) (cat $(srcdir)/func-header.xml ; \ $(PERL) $(gnumeric_docdir)/make-func-list.pl func.defs ; \ cat $(srcdir)/func-footer.xml \ ) >functions.tmp ; \ if xmllint -noent --format --encode "UTF-8" functions.tmp >functions.out ; then \ mv functions.out $@; rm functions.tmp; \ fi func.defs: $(top_builddir)/src/gnumeric$(EXEEXT) LC_ALL="$(locale)" ; export LC_ALL ; $(top_builddir)/src/gnumeric --dump-func-defs="$@" # At some point, it may be wise to change to something like this: # scrollkeeper_localstate_dir = @SCROLLKEEPER_STATEDIR@ omf: omf_timestamp omf_timestamp: $(omffile) -for file in $(omffile); do \ absfile=$(srcdir)/$$file; \ test -r $$file && absfile=$$file; \ scrollkeeper-preinstall $(docdir)/$(docname).xml $$absfile $$file.out; \ done; \ touch omf_timestamp install-data-hook-omf: $(mkinstalldirs) $(DESTDIR)$(omf_dest_dir) for file in $(omffile); do \ absfile=$(srcdir)/$$file.out; \ test -r $$file.out && absfile=$$file.out; \ $(INSTALL_DATA) $$absfile $(DESTDIR)$(omf_dest_dir)/$$file; \ done -scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir) uninstall-local-omf: -for file in $(omffile); do \ basefile=`basename $$file`; \ rm -f $(DESTDIR)$(omf_dest_dir)/$$basefile; \ done -rmdir $(DESTDIR)$(omf_dest_dir) -scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) clean-local-omf: -for file in $(omffile); do \ rm -f $$file.out; \ done all: omf $(docname).xml: $(entities) -ourdir=`pwd`; \ cd $(srcdir); \ cp $(entities) $$ourdir app-dist-hook: if test "$(figdir)"; then \ $(mkinstalldirs) $(distdir)/$(figdir); \ for file in $(srcdir)/$(figdir)/*.png; do \ basefile=`echo $$file | sed -e 's,^.*/,,'`; \ $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \ done \ fi install-data-local: omf $(mkinstalldirs) $(DESTDIR)$(docdir) for file in $(xml_files); do \ cp $(srcdir)/$$file $(DESTDIR)$(docdir); \ done if test "$(figdir)"; then \ $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \ for file in $(srcdir)/$(figdir)/*.png; do \ basefile=`echo $$file | sed -e 's,^.*/,,'`; \ $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ done \ fi install-data-hook: install-data-hook-omf uninstall-local: uninstall-local-doc uninstall-local-omf uninstall-local-doc: -if test "$(figdir)"; then \ for file in $(srcdir)/$(figdir)/*.png; do \ basefile=`echo $$file | sed -e 's,^.*/,,'`; \ rm -f $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ done; \ rmdir $(DESTDIR)$(docdir)/$(figdir); \ fi -for file in $(xml_files); do \ rm -f $(DESTDIR)$(docdir)/$$file; \ done -rmdir $(DESTDIR)$(docdir) clean-local: clean-local-doc clean-local-omf # for non-srcdir builds, remove the copied entities. clean-local-doc: if test $(srcdir) != .; then \ rm -f $(entities); \ fi .PHONY : html validate chm pdf html : -mkdir -p html xsltproc -o html/gnumeric.shtml \ --param db.chunk.chunk_top 0 \ --param db.chunk.max_depth 3 \ --stringparam db.chunk.basename "gnumeric" \ --stringparam db.chunk.extension ".shtml" \ --stringparam db2html.css.file "gnumeric-doc.css" \ /usr/share/xml/gnome/xslt/docbook/html/db2html.xsl \ $(srcdir)/gnumeric.xml validate : xmllint --valid --noout $(srcdir)/gnumeric.xml # http://docbook.sourceforge.net/release/xsl/current/doc/html/htmlhelp.encoding.html # http://home.kc.rr.com/rstone/ricks.htm # http://frogleg.mvps.org/helptechnologies/htmlhelp/hhtutorials.html # --param htmlhelp.force.map.and.alias 1 chm-stamp chm : -rm -rf chm output mkdir -p chm cd $(srcdir) ; ../add_dbhh.pl --out-dir=$(abs_builddir)/output --map-file=$(abs_builddir)/chm/gnumeric.hhmap cd chm && xsltproc -o . \ $(srcdir)/../gnumeric-docbook-2-htmlhelp.xsl\ ../output/gnumeric.xml xmllint --valid --noout --html chm/*.html for f in chm/*.html; do \ xmllint --format --html "$$f" > chm/.$$$$; \ mv chm/.$$$$ "$$f" ; \ done cp -r $(srcdir)/figures chm touch chm-stamp @ENABLE_PDF_VIA_DBCONTEXT_TRUE@gnumeric.pdf: @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ env TEXINPUTS=$(srcdir):.: dbcontext -t tex -Pfo.setup=1 -I . \ @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ -P imagedata.default.scale='scale=600' \ @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ -o gnumeric.tex $(srcdir)/gnumeric.xml @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ sed -i -e 's/\xE2\xA8\x89/\\ensuremath{\\times}/' gnumeric.tex @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ sed -i -e 's/\\begin{verbatim}\([^_]*\)\\end{verbatim}/\\texttt{\1}/g' gnumeric.tex @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ sed -i -e 's/\\texttt{\\emph{\\small{\(.*\)}}}:/\\texttt{\\emph{\1}}:/g' gnumeric.tex @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ sed -i -e 's/ *>{} */\\ensuremath{{}>{}}/g' gnumeric.tex @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ sed -i -e 's/ *<{} */\\ensuremath{{}<{}}/g' gnumeric.tex @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ sed -i -e 's/\\makeglossary/\\makeglossary\n\\setlength{\\headheight}{36pt}/g' gnumeric.tex @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ env TEXMFCNF=$(srcdir): \ @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ TEXINPUTS=$(srcdir):/usr/share/texmf/tex/context/dbcontext/style: \ @ENABLE_PDF_VIA_DBCONTEXT_TRUE@ texexec --pdf --mode=A4 --verbose gnumeric.tex @ENABLE_PDF_VIA_DBLATEX_TRUE@gnumeric.pdf: @ENABLE_PDF_VIA_DBLATEX_TRUE@ dblatex -t tex -Pfo.setup=1 -I . \ @ENABLE_PDF_VIA_DBLATEX_TRUE@ -P imagedata.default.scale='scale=0.6' \ @ENABLE_PDF_VIA_DBLATEX_TRUE@ -P latex.encoding=utf8 \ @ENABLE_PDF_VIA_DBLATEX_TRUE@ -P latex.output.revhistory=0 \ @ENABLE_PDF_VIA_DBLATEX_TRUE@ -o gnumeric.tex $(srcdir)/gnumeric.xml @ENABLE_PDF_VIA_DBLATEX_TRUE@ sed -i -e 's/\xE2\xA8\x89/\\ensuremath{\\times}/' gnumeric.tex @ENABLE_PDF_VIA_DBLATEX_TRUE@ sed -i -e 's/\\begin{verbatim}\([^_]*\)\\end{verbatim}/\\texttt{\1}/g' gnumeric.tex @ENABLE_PDF_VIA_DBLATEX_TRUE@ sed -i -e 's/\texttt{\emph{\small{\(.*\)}}}:/\texttt{\emph{\1}}:/g' gnumeric.tex @ENABLE_PDF_VIA_DBLATEX_TRUE@ sed -i -e 's/ *>{} */\\ensuremath{{}>{}}/g' gnumeric.tex @ENABLE_PDF_VIA_DBLATEX_TRUE@ sed -i -e 's/ *<{} */\\ensuremath{{}<{}}/g' gnumeric.tex @ENABLE_PDF_VIA_DBLATEX_TRUE@ sed -i -e 's/\\makeglossary/\\makeglossary\n\\setlength{\\headheight}{36pt}\n\\input{textdefs.tex}/g' gnumeric.tex @ENABLE_PDF_VIA_DBLATEX_TRUE@ for runs in $$(seq 1 4); do \ @ENABLE_PDF_VIA_DBLATEX_TRUE@ env TEXINPUTS=$(srcdir): \ @ENABLE_PDF_VIA_DBLATEX_TRUE@ pdflatex -interaction nonstopmode gnumeric.tex ; \ @ENABLE_PDF_VIA_DBLATEX_TRUE@ done @WITH_WIN32_TRUE@gnumeric.hhmap: chm-stamp @WITH_WIN32_TRUE@ -(cd chm && wine 'C:\Program Files\HTML Help Workshop\hhc.exe' gnumeric.hhp) @WITH_WIN32_TRUE@ cp chm/gnumeric.hhmap . @WITH_WIN32_TRUE@gnumeric.chm: gnumeric.hhmap @WITH_WIN32_TRUE@ cp chm/gnumeric.chm . # from gnumeric-doc.make dist-hook: validate # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: